The Andersen Camper Wheel Chock and Leveler # AM3604 can be used with dual wheels. It would only need to be used on the outer wheel not both. view full answer...
We do have plenty of other wheel chocks available for you to check out like the:
-Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs # UF21-001091 which fits RV's and trailers that have a wheel spacing of up to 10-1/2", or,
-The Super Grip Chock XL Wheel Stabilizers for Tandem-Axle Trailers and RVs # UF21-001095, which fits RV's and trailers that have a wheel spacing of 3-1/2" up to 17".
If you let me know what wheel spacing you are needing for your coach, I'd be happy... view full answer...
You will just need to measure in between your wheels on your Coachmen Freedom Express 238BHS to verify what you need exactly, however we do have the Stromberg Carlson Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs # SC47MR.
This wheel chock stabilizer will fit a wide range of vehicles with a wheel spacing of 2" to 17", and is made from durable steel with a rust resistant coating.
If you measure the distance between your wheels and are still unable to find what you're looking... view full answer...
Yes, you can order extra mounting plates for the Erickson Removable Motorcycle Wheel Chock # EM07506. Replacement Mounting Plates # EM56ZV is the part number you are looking for; this kit comes with 4. This allows you to move the chock to different locations in your trailer just as you were wanting to do. view full answer...
The replacement hardware screws that come with the Tow-Rax Removable Wheel Chock w/ Wood Screws, part # TWSPWC, are listed as part # TWSPWFKW.
If you need to mount the Tow-Rax Removable Wheel Chock to a metal floor then you will want part # TWPH2770, which includes mounting hardware for both wood and metal flooring. view full answer...
You definitely want to put some sort of chock in the wheel that's still on the ground when raising a trailer.
The Blaylock EZ Jack # EZ-JACK is not the same radius as the Andersen Tuff Chock # 3605. The Tuff Chock does match the Andersen Rapid Jack # AM3620. view full answer...
The part number for the base plate used in the Rack'em Manufacturing Removable Wheel Chock part # RA-17 is the Steel Replacement Base part # RA-17B. Please keep in mind that this is the base plate only and you will need to supply your own hardware in order to secure the base plate to your trailer. view full answer...
As of right now, we do not offer any power leveling systems that are compatible with a Class C motorhome like your 2011 Fleetwood Tioga Montara 23B.
Instead, I recommend you use the:
-Andersen Camper Wheel Chock and Leveler # AM3604.
These wheel chocks will do a wonderful job of leveling your motorhome, is made in the USA, and will work with trailers weighing up to 30,000 lbs with up to 32" diameter tires.
I know using wheel chocks isn't exactly what you want to use, but as of right... view full answer...
I went ahead and checked around, and it does not appear that there are any electric stabilizer/leveling jacks for your 2011 Fleetwood Tioga Montara.
Instead, what we have is the Andersen Camper Wheel Chock and Leveler # AM3604.
This stabilizer provides leveling at any increment from 1/2" to 4", will work great on trailers that weigh up to 30,000-lbs, with up to 32" diameter tires, and can be custom to fit your application by trimming up to 4" off the chock.
Attached is dimension diagram... view full answer...
Although we don't have any kits for a 33" tire you can use the 2" x 12' Erickson E-Track Wheel Tie-Down Strap # EM58523 along with the Erickson E-Chock Wheel Chocks # EM09162-2 to essentially create your own kit. The tie down strap has a safe working load limit (WLL) of 1,100 lbs and a maximum load (break strength) of 3,300 lbs.
These install in the Erickson E-Tracks like part # E19148. view full answer...
I have a solution for you, but the # BWMC2301 is not a confirmed fit and B&W does not offer a Biker Bar for a Honda Goldwing.
Instead, the best option we have for you is the Tow-Rax Removable Wheel Chock part # TWSPWM. It can be bolted directly to the trailer floor, it will accept different wheels sizes, and there is no interference issues with your front brakes.
If you don't already have a set of shock absorbing ratchet straps, I recommend using the ShockStrap Ratcheting Motorcycle... view full answer...
I have a solution for your 2008 Fleetwood motorhome. The Andersen Camper Wheel Chock and Leveler # AM3604 will work with vehicles weighing up to 30,000-lbs and have up to 32" diameter tires.
These chock's are able to be customized to ensure a perfect fit, and can be trimmed up to 4".
This product also includes a lifetime warranty and is made proudly in the United States. view full answer...
I have some recommendations as the Biker Bar from B&W is specific to Harley and similar chassis vehicles. Your 2021 Indian Challenger has a much different frame and will not work on the Biker Bar system. Instead you should use a Flint Hill Goods Adjustable Wheel Chock # FHG37ZR along with the ShockStrap Ratchet Motorcycle Tie-Downs # 297-9RSBB-M. The wheel chock is adjustable and will fit wheels 17" to 21" and tires 3-1/8" to 7-1/8" wide. It will help to hold your Indian in position while... view full answer...
You can install the etrailer Horizontal E-Track # e62VR and drive over it just fine with a vehicle as the tracks only sit 1/2" tall - then you can secure your side by sides with a tie-down kit like part # EM98CV you were looking at.
To secure the front wheel of your dirt bikes I recommend picking up a few of the CargoSmart Motorcycle Wheel Chock # 3481731 as well as a few of the single E-Track connections # SLSZ since the wheel chock connection points won't be as far apart as what you'll... view full answer...
We do not have any self leveling systems for a class C or B plus motorhomes, however I have an option you might want to check out:
-The Andersen Camper Wheel Chock and Leveler # AM3604.
These chocks can be can be trimmed up to 4" to ensure you have a perfect fit for your motorhome, will fit tires up to 32" in diameter and will work well with vehicles weighing up to 30,000-lbs. view full answer...
If you used a Roadmaster Adjustable Wheel Net # RM-2150 on both of your front wheels you would not necessarily need to use safety chains as these will provide an additional attachment point to the wheel chocks that are on the tow dolly already. view full answer...
If you already have four E-Tracks mounted to the floor of your enclosed trailer and you wish to secure your ATV with only straps, not wheel chocks too, you certainly can do this. But instead of using the strap-and-chock kit # EM09160 you can use one of the E-Track strap-only items shown on the linked page, such as 2-inch x 12-foot ratchet strap # EM59136 which is rated for a working load limit (WLL) of 1165-lbs.
We also have longer ratchet straps like the 16-foot # EM59139 with the same... view full answer...
The traditional gooseneck coupler locks like the # BLTL-53-40D2 will not work on this adapter. We do have a few solutions though that will help with theft reduction though.
First you can loosen the set screw that holds the inner coupler tube in, remove the coupler, and then store it in a locked vehicle or other location. If the coupler part isn't there no one will be able to come and steal your trailer when you're not around it. Another more traditional option would be using the Super... view full answer...
I have a solution for you, but the CargoSmart X-Track Cargo Organizer Pro Bundle # 3481788-P does not come with any backing plates, but you can add them with the E-Track Backing Plate # e96RR. You will need to drill new holes in this backing plate in order to make it compatible with the CargoSmart X-Tracks, but this is the only option we have available.
While there aren't any wheel straps like the Pro Grip # 317-18900 that fit in the E-Track rails, you can use the Erickson E-Track Tie-Down... view full answer...
A bolt-on axle over-under kit like # K71-384-00 and # K71-385-00 will typically give your trailer between 4 and 5-inches of lift. The exact amount of lift depends on the axle diameter and the height of the leaf spring stack. Lift will be the sum of the axle diameter plus the height of the spring stack. Kit # K71-385-00 works for axles with 3-inch diameter
Installing an axle over-under lift kit on a trailer is not a complex job but it does require the right safety equipment to avoid risk... view full answer...
Go To Results